Catches and starts but immediately dies
Thread Starter
Joined: Aug 2008
Posts: 520
Likes: 0
From: Minneapolis
Catches and starts but immediately dies
So I am trying to get my car to start after 6 months of working on it
its a 6port turbo relevant mods are as follows
TID Mod
S5 turbo
Aeromotive FPR @40 psi base pressure
stock TII injectors
SS fuel lines all around
A2w intercooler
Rtek 2.1 using arghx's timing maps
https://www.rx7club.com/rtek-forum-168/new-boost-based-timing-maps-885556/
9.4 rotors
Turbo LIM and UIM
Emissions removed
Precat delete
Here is what happens it wasn't getting any fuel when I was cranking it over so I adjusted the cranking Fuel to 35ms (someone set it to 0ms i.e. closed before I got it) so it will catch and start up but immediately die. I can do it again and again with the same results.
I will post up a video later
its a 6port turbo relevant mods are as follows
TID Mod
S5 turbo
Aeromotive FPR @40 psi base pressure
stock TII injectors
SS fuel lines all around
A2w intercooler
Rtek 2.1 using arghx's timing maps
https://www.rx7club.com/rtek-forum-168/new-boost-based-timing-maps-885556/
9.4 rotors
Turbo LIM and UIM
Emissions removed
Precat delete
Here is what happens it wasn't getting any fuel when I was cranking it over so I adjusted the cranking Fuel to 35ms (someone set it to 0ms i.e. closed before I got it) so it will catch and start up but immediately die. I can do it again and again with the same results.
I will post up a video later
Thread
Thread Starter
Forum
Replies
Last Post
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM



