hey. I have an 1987 T2 with the only mods being complete emissions delete, 680cc secondary injectors, FCD and 3" exhaust.


Car starts perfect when cold, like absolutely dreamy. haha. but if it is warm and i don't give it about 20 minutes to cool down it has a lot of trouble starting. the primary injectors are brand new and the secondaries were cleaned and flow tested - came out perfect. I can get it started by pulling the EGI fuse but even that gives me trouble sometimes. the compression is around 100 on all sides on both rotors.

anyone have any ideas? I think the TPS is bad, could this contribute?

 

check compression

 

That sounds right your temp might be bad and thinking its hotter then it real is try to unplug it and see if it starts then

 

guess you didn't read my post...


hrm, okay i'll try that. thanks.

 

ooo i see it now check your water thermo sensor to see if it is in spec my car has over 100 psi on each rotor and it has hot starts. you also need something to control the secondaries.