2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

car won't start! help!!

Thread Tools
 
Search this Thread
 
Old 02-07-03, 07:40 AM
  #1  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
Question car won't start! help!!

i have posted about this before and haven't received much response about it. my car won't start. i tried putting gas in it and nope still nothing..i found 2 fuses that were blown in the interior fuse panel and i think one of them was a 75 amp fuse...are there 75 amp fuses in these cars? (87 non- turbo) it could have also been a 7.5 obviously, and i went to autozone and he said to check the large fuses under the hood. but the damn thing won't even turn over. the guy at the store told me to crank it maunually. anyone know how to do that? any help at all would be appreciated, thanks...gerry
Old 02-07-03, 07:46 AM
  #2  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
Have you tried a push start?
Old 02-07-03, 07:48 AM
  #3  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
ya i did that a while ago but i can't do that everytime...but ya that would be a good way to see if the engine is dead thanks...anyone else have any ideas?
Old 02-07-03, 07:51 AM
  #4  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
Ok so the engine just does not turn over at all? Even with the battery charged up.

How did the car get to be like this did it just not start up one morning or did it fudge up all of a sudden?
Old 02-07-03, 07:57 AM
  #5  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
it was sitting in my driveway for about 2 or 3 weeks because i lost my license and didn't have a job and therefore i couldn't get any gas so i couldn't drive it...what happened first was i jumped before i put gas in it and it started and then shut off in like 2 minutes i am assuming becuase of no gas and ever since then the car has done nothing but the lights and everything work fine so that battery is chared and whenever i try to start it i always have it jumped to another car for support...
Old 02-07-03, 08:00 AM
  #6  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
Maybe the fuel filter became clogged when the car sucked up the last of the gas in the tank and the nasty stuff that is floating around in there was sucked up too. Maybe you should buy one and change it but be sure that the gas tank has atleast five gallons in it.
Old 02-07-03, 08:01 AM
  #7  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
My friends Neon did this a couple of times. the car started fine and then after about a minute it just died. We had to tow his butt about ten miles to his house.
Old 02-07-03, 08:02 AM
  #8  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
good good good idea...i only have 2 gallons in it and i need to look at the haynes manuel to see where the fuel filter is so i can see if its clogged...do you think i should check the large fuses under the hood also?
Old 02-07-03, 08:04 AM
  #9  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
I can't hurt to look for blown out fuses. The fuel filter I (think) is on the driver's side towards the rear of the engine bay. It is easily visible from under the car.
Old 02-07-03, 10:16 AM
  #10  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
i looked at the underhood fuses and the "80" was blown so i went to the junkyard and got a new one and it was a bitch to get out. but do you think that could be controlling the ignition system? i think it could be.
Old 02-07-03, 11:05 AM
  #11  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
Is'nt that the "Main" fuse? If it is that would have done it since I think it controls the majority of the stuff on the car. Did you start her up. Don't forget to get more gas and you should proly get the fuel filter since it probably is dirty if it is not 100% clogged.
Old 02-07-03, 11:08 AM
  #12  
Senior Member

 
Crionics's Avatar
 
Join Date: Sep 2001
Location: KY
Posts: 486
Likes: 0
Received 0 Likes on 0 Posts
The EGI fuse is 80A, isn't it? I didn't know it was the only one, though.
Old 02-07-03, 11:12 AM
  #13  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
I think the egi fuse is a 30 or 60 amp one but I am not 100% on that. The egi fuse would not cause the car to stop turning over it would only stop the puel from reaching the injectors. His engine just did not turn over at all.
Old 02-07-03, 11:45 AM
  #14  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
thanks for all your help guys...i really appreciate it....i can't put the new fuse in now as its snowing very hard out but i will tommorrow and i will let you all know that transpires...thanks again...gerry
Old 02-07-03, 12:37 PM
  #15  
Senior Member

Thread Starter
 
xxxbadassfoxxxx's Avatar
 
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes on 0 Posts
i got it!! that was it...the "80" fuse now all i need is a jump and im back in buisness thanks everyone!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
torky007
3rd Generation Specific (1993-2002)
7
08-17-15 05:14 PM



Quick Reply: car won't start! help!!



All times are GMT -5. The time now is 05:44 PM.