2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Car Wont Start !!!!!!

Thread Tools
 
Search this Thread
 
Old Feb 7, 2005 | 08:42 PM
  #1  
68Sniper's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 170
Likes: 0
From: Illinois
Car Wont Start !!!!!!

well my 7 dicided not to start so i checked the batt and its good alt good but i jacked it up and tested starter with a test light and all of a sudden it started working (weird) and it was fine untill the next day and the same thing happend it wont roll over like a dead batt is this a comp problem or a relay that i dont know2 about or is it just my luck any info is good info at this point thanks 68Sniper and it sucks to push it around and i also took the cluch relay out and wired to together because i thought that it was it WRONG
Reply
Old Feb 7, 2005 | 08:53 PM
  #2  
nlc1179's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 451
Likes: 0
From: Columbus, OH
if i had to guess, you have a loose connection somewhere. are all the dash lights comming on and everything? you might just need a new starter. i would check again to see if you have current going to the starter. if you do, make sure you have power at the ground of the starter too. the armature, the windings, or the coils in the starter could be going bad and just have a loose connection right now.
Reply
Old Feb 7, 2005 | 09:00 PM
  #3  
Defiant FC3S's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Oct 2004
Posts: 116
Likes: 0
From: Olathe, KS
if all else fails, push or pull start it. believe me i have more staring problems then anyone else.
Reply
Old Feb 7, 2005 | 09:27 PM
  #4  
68Sniper's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 170
Likes: 0
From: Illinois
yes i have 12v on the starter and its like when you try to start the car without cluch pushed in is what it is like but i hear a clicking noise when i try to start does that help?
Reply
Old Feb 7, 2005 | 09:35 PM
  #5  
nlc1179's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 451
Likes: 0
From: Columbus, OH
when ther is a clicking noise, sometimes thats cause the battery is too dead to crank the engine. have you tried jumping it?
Reply
Old Feb 7, 2005 | 09:40 PM
  #6  
68Sniper's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2005
Posts: 170
Likes: 0
From: Illinois
no but i put a load test on it and it was in the (GOOD) range
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
torky007
3rd Generation Specific (1993-2002)
7
Aug 17, 2015 05:14 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM




All times are GMT -5. The time now is 02:07 AM.