2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Car vibrates in high speed when let off throttle

Thread Tools
 
Search this Thread
 
Old Aug 29, 2012 | 12:12 AM
  #1  
jlee916's Avatar
Thread Starter
Speed Racer
 
Joined: Dec 2011
Posts: 214
Likes: 0
From: Sacramento, CA
CA Car vibrates in high speed when let off throttle

My car basically vibrates when I let go the gas pedal or go in neutral at high speed. The vibration stops when I'm slowed down to about 25mph or so.

What is causing this vibration? I had a friend ride in the passenger seat today and he said he doesn't feel much vibration as I do when I'm in the driver's seat. I have a 5 speed tranny and custom exhaust. Previous owner said to replace the differential 'cos it's not locking, but is he correct?
Reply
Old Aug 29, 2012 | 12:31 AM
  #2  
Derekcat's Avatar
Rotary Zealot!
Tenured Member: 20 Years
iTrader: (8)
 
Joined: Jun 2004
Posts: 1,736
Likes: 2
From: Milwaukie, Or
For me that's always been the driveshaft's U-Joints.. Unfortunately to check that, you usually need to remove the cat/presilencer, Y-pipe, and a piece of the heat shielding, and then remove the drive shaft and feel if it's smooth tilting on each direction and twisting [check the front and back U-Joints].
Reply
Old Aug 29, 2012 | 06:00 PM
  #3  
CALPICO's Avatar
Full Member
iTrader: (4)
 
Joined: May 2011
Posts: 125
Likes: 0
From: Union City, CA
it could possibly be something as simple as unbalanced wheels or alignment issues.
Reply
Old Aug 29, 2012 | 06:13 PM
  #4  
barkz's Avatar
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 1,261
Likes: 1
From: New Hampsha
check u joints, or carrier bearing
Reply
Old Sep 12, 2012 | 11:13 AM
  #5  
jlee916's Avatar
Thread Starter
Speed Racer
 
Joined: Dec 2011
Posts: 214
Likes: 0
From: Sacramento, CA
Another thing I noticed today is that when the car vibrates in neutral, putting the gear into 4th or lower gear and taking it out right after would stop the vibrating. Any inputs?
Reply
Old Sep 12, 2012 | 11:59 AM
  #6  
barkz's Avatar
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2011
Posts: 1,261
Likes: 1
From: New Hampsha
have you checked anything that has been suggested?
Reply
Old Sep 12, 2012 | 01:29 PM
  #7  
jlee916's Avatar
Thread Starter
Speed Racer
 
Joined: Dec 2011
Posts: 214
Likes: 0
From: Sacramento, CA
I haven't yet and it's dumb of me to ask without checking first, but I thought I update with some findings. I plan to check those that were suggested when I get a stock exhaust and cat to smog. I figured I'll do it all when I'm under the car.
Reply
Old Sep 12, 2012 | 09:58 PM
  #8  
86rxNa's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 303
Likes: 2
From: Md
I got the same symptoms on my car right now, so I ordered a drveshaft from mazdatrix. Ill update if my problem fixes when I get it put on.
Reply
Old Sep 13, 2012 | 12:28 AM
  #9  
jlee916's Avatar
Thread Starter
Speed Racer
 
Joined: Dec 2011
Posts: 214
Likes: 0
From: Sacramento, CA
^alright cool, im looking forward to hearing from you. im still saving up money for parts right now.
Reply
Old Sep 15, 2012 | 10:31 AM
  #10  
86rxNa's Avatar
Senior Member
 
Joined: Jun 2011
Posts: 303
Likes: 2
From: Md
Originally Posted by jlee916
^alright cool, im looking forward to hearing from you. im still saving up money for parts right now.
Well I got my car back and replacing the driveshaft has fixed my problem. It cost me $266 for the aftermarket driveshaft from mazdatrix and it cost me $220 in labor. My car drives so smooth now. As far as you go I would not keep driving it since if it falls off you will have an even bigger problem. Also I noted some pinging noises along with the heavy vibration at 25 and at 40 mph. After a few weeks the pinging went away and the vibrations got worse. Well anyway gl with ur car I hope my info helps you.
Reply
Old Sep 15, 2012 | 10:55 AM
  #11  
jlee916's Avatar
Thread Starter
Speed Racer
 
Joined: Dec 2011
Posts: 214
Likes: 0
From: Sacramento, CA
Thanks! I get pay next wednesday so ill definitely replace it asap. Hopefully this will solve it
Reply
Old Sep 16, 2012 | 07:15 PM
  #12  
jlee916's Avatar
Thread Starter
Speed Racer
 
Joined: Dec 2011
Posts: 214
Likes: 0
From: Sacramento, CA
are the s4 and s5 N/A driveshaft interchangeable? I have a 1990 GXL and was wondering if I can use one off an s4.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bb6guy
Old School and Other Rotary
10
Oct 1, 2018 08:07 AM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
bb6guy
3rd Generation Specific (1993-2002)
3
Aug 12, 2015 03:29 PM




All times are GMT -5. The time now is 02:07 AM.