Car stalled on interstate????
03-23-05, 12:12 AM
#52
Dyslexia gotta love it
Join Date: Aug 2004
Location: Geneseo IL usa
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by shawn1985
if you take the plugs out you should hear a solid thunk when you turn the engine over by hand one for each rotor if its a whisp then you blew a seal. fyi when doing a compression test disconnect the ign coils or flames will come out, not a good thing for the car
03-23-05, 07:26 AM
#53
87 T2
Thread Starter
Join Date: Jun 2002
Location: florida
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
I took the cap off the PD and the screw was in the cap!!! I take it this is bad as well, should i try and get it to go back in or replace it?
I tested for spark by puting a screw driver in the plugs and having someone crank the engine and looked to make sure they arked, they all arked and I got shocked once. is this an accurate test?
I tested for spark by puting a screw driver in the plugs and having someone crank the engine and looked to make sure they arked, they all arked and I got shocked once. is this an accurate test?
Last edited by josh greene; 03-23-05 at 07:29 AM.
03-23-05, 12:43 PM
#55
87 T2
Thread Starter
Join Date: Jun 2002
Location: florida
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RotaryResurrection
It'll tell you that all your coils are working, but not if your plugs are fouled.
03-24-05, 02:54 PM
#57
87 T2
Thread Starter
Join Date: Jun 2002
Location: florida
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=RotaryResurrection]either replace the injector lower grommets or use a little bit of sealant on the lower edge of them to prevent a vacuum leak there.
What should I use to seal the injector grommets???
What should I use to seal the injector grommets???
03-24-05, 03:38 PM
#59
87 T2
Thread Starter
Join Date: Jun 2002
Location: florida
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
RTV??? sorry i get a little nervious when theres gas involved, the plugs still arnt here the guy sent them usps i shoulf have them in the morning some time. Im gonna get everything else back together, I removed the rats nest and im changing all the vac lines what do you suggest doing with the vac line in the intake and the one on the oil fill neck?
also thanks alot for all the help!!!
also thanks alot for all the help!!!
03-25-05, 03:09 PM
#60
87 T2
Thread Starter
Join Date: Jun 2002
Location: florida
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
well I got it all done and its exactly the same....push starts but wont stay running unless i keep on the gas.......sounds the same when cranking trys to start but just wont....I think its time for me to pass it on and pay maztech to find out whats wrong but everone iv called and talked to says it sounds like one of the rotors isnt keeping up with the other one. :-(
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
03-11-19 05:34 PM
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM