Relisys190

iTrader: (4)

OK, so latly i've been noticing that my car is whining at me.

Like have you ever heard a supercharger? the whine it makes at idle?

Well, i am getting that ALL THE TIME. i have no clue what it could be, i havnt changed anything in a few weeks... and another thing. my transmission. it whisles at me.. but only intermitantly. like 1 day it will do it, the other day it wont wistle. any idea what would cause this? i thought bearings at first, but than it would be all the time.


Thanks guys

-markus

Icemark

worn or mis-aligned belts?

Black13B

iTrader: (1)

could be belts.. my alt belt was whinning and slipping.. fixed now..

my tranny whines a bit as well though

Nick86

iTrader: (1)

Does the whining (fron the car, not your girlfriend) change when you press the clutch?

Could be the T/O bearing.

Relisys190

iTrader: (4)

no it's definatly coming from the front of the car. sounds definatly like belts (in my case belt) wait.. doesnt the water pump make a noise when it's about to go bad?? i have a brand new belt on there.. and i set it pretty well. supposedly if you grab the belt with your thumb and index finger and turn it... it's not suppose to turn all the way around. you guys know what i'm talking about?

Anyway, i dunno what the hell the sound is. just started.

the clutch and everything else are fairly new (under 5k )

any other idea's what it could be?

-Markus

ZenRXSeven

My girlfriend stops whining when I press in her clutch. . No, wait... I don't have a girlfriend, I forgot. . Wanna know a great reason why cars are so much better than girls? It's so much easier to perform weight reduction on a car....

Congratulations to myself for another useless post.

jeremy

iTrader: (1)

to shut up car, belt dressing.

to shut up girl, undress.

Relisys190

iTrader: (4)

it's not really a belt 'squeel' i've heard those before. this is almost like a WHINE... almost like there's a supercharger under my hood. it's a very distinctive noise. and increase's with engine rpms very strange

What are signs of water pump failure. besides the obvious leak. will they make noise?

My water pump has about 30,000 since i replaced it last. and hasnt given me trouble yet..

thanks guys.

-markus

Nick86

iTrader: (1)

I can't say for sure that's the sound of a dying pump, but I'd like to know: I'm on the original water pump, and for the last 10,000 miles it has rattled like quarters in a tin can. It hasn't leaked, but I fear it is dying.

If the noise is all the time, take the belts off, and start the car. (don't let it run for a long time!) If without the belt, the noise is still there, you know it's not the pump or the alternator. If the noise dissapears, then spin the pump to see if it makes noise. If not, try the alternator.

You might want to check the Fan Clutch too.....

Relisys190

iTrader: (4)

--- E-Fan. it was one of the first things i replaced when i got the car.

But thanks for the help, i'll try it out with the belts off ... i wont run it for more than 20-30 seconds, just so i can "listen"

p.s. 20-30 seconds without waterpump moving shouldnt over heat it right? lol, damn i would hope not..

again thanks

-Markus

rx_7_driver

should be fine with only running it for a couple of seconds, mine does the same thing, i think its my alt. it squeaks when i turn it by hand............



-Shawn

Relisys190

iTrader: (4)

would it be safe to 'lube' the bushings on the altenators? to make them stop sqeeking?

-Markus

prmazdarx7

do you have a sound system in your car?

if so it could also be some feedback from the engine
(bad grounds) maybe?

TheHunt

Mine whines when I have my AC on. Took me a while to figure that's what was going on.

Buizda

My power stearing pump before I removed it would whine like a supercharger. It would also beep at me like I didn't already notice the whine though.

rx-7s rock

Two things: First there is a whine coming from my transmission when the car is cold which I am assuming to be the T/O bearing since when I engage the clutch, the sound goes away. Second thing is I just put new belts on my Accord and they whine like a supercharger.

I have no clue why they do this and I don't really care one way or the other, but it just seems like similar problems that you are having.

BlackR1

your girlfriend is a whining 'tranny?' (transexual?) hyuk hyuk hyuk

if it makes clunking/light grinding sounds intermittantly when the clutch is engaged (foot off of clutch) and whining...it may be a sign of bad bearings in the transmission-- time for a rebuild. Usually the telltale sign will be if it makes those sounds in all gears except for 4th. That is worstcase scenario though...

Justin87rx7

My girlfriend and sound simmular to. They both scream and want more.


Justin

Pyrocloud

Today while pulling the actuators, I noticed a similar noise comming from just under the air filter.

Try this start your car, open hood, remove air filter, then raise rpm's by pushing on the throtle cable.

Is this your noise? It sounds like sucking air. The higher the RPM's the louder the noise.

What's up Markus!

Actuators are frozen soild. Sucks! Removed all that emmissions crap today. It was super easy.

marcus219

Put it in her mouth...

TURB0 II

true

christi

Mine does it. When the clutch is not pushed in - it makes a whining type noise, when I push the clutch in it stops.

I have had the car for a year and 2 months - and it's been doing it roughly since I got it.

Icemark

worn or old throw out bearing

jgrts20

r u sure u dont have a supercharger under the hood, hehe!! seriously though it just might be one of those things that happens on a (almost) 20 yr old car!! pin point where it might be comin' from then let us know, could be anything mine whistles and moans every now and then!! oh my bad thats my girlfriend, hehehe!! PEACE!!

christi

Alright thanks. You're doing a great big help with me lately - and I appriocate your help.


Now.. for a silly tid-bit question....

How do you figure? How can I check up close? How much does it cost to get a new one? And.. how does the clutch noise, make the course of action with a worn or old throw out bearing?

I guess I really am not understand - I'm still learning! =/