2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

car has no power? wont start

Thread Tools
 
Search this Thread
 
Old 03-14-06, 11:29 AM
  #1  
Junior Member

Thread Starter
 
Tencma's Avatar
 
Join Date: Mar 2006
Location: ks
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
car has no power? wont start

ok so I just picked up a 89 covertable. The car has a good bat- and all good fuse's. But the car wont start. Head lights work as well as the dome light. No dash lights or anything else. You guys got any ideas? It also has a alpine alarm and it dont even work.
Old 03-14-06, 05:13 PM
  #2  
Junior Member

Thread Starter
 
Tencma's Avatar
 
Join Date: Mar 2006
Location: ks
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
ok I got the dash lights to work. Ive also pulled the alarm hopen that would do it. As far as I can tell theres just no power to the key. No beeps or engine lights come on. The fuel pump dosnt even work.
Old 03-14-06, 05:24 PM
  #3  
I live in an igloo

 
BlaCkPlaGUE's Avatar
 
Join Date: Jul 2004
Location: calgary alberta
Posts: 2,546
Likes: 0
Received 0 Likes on 0 Posts
Well if all the fuses are good and you actually tested them all, im sorry to say but your fucked. This is an electrical nightmare that no one is going to want to fix.
Old 03-14-06, 06:31 PM
  #4  
Junior Member

Thread Starter
 
Tencma's Avatar
 
Join Date: Mar 2006
Location: ks
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
not given up yet! Ok i tracked it down to the key isnt getting any power. That and the windows. so Im thinking its somewere in the batter/ ac wires. the alarm gets power but dosnt arm.
Old 03-14-06, 06:42 PM
  #5  
Junior Member

 
S4.5RX7's Avatar
 
Join Date: Mar 2006
Location: VA
Posts: 10
Likes: 0
Received 1 Like on 1 Post
If all your fuses are good under the hood, check them on the inside (Especially the meter and engine fuse). If that doesn't get it, try pulling off the cover around the steering column and check the back side of the key cylinder to see if the screw backed out (Alot of key cylinders have that screw back out which causes everything to get fucked up). If thats ok, and the key is getting power (you can check it there), try to swap the CPU on the drivers kick panel with a known good one. Its weird how many circuts run through the CPU that can **** up your world. If that doesn't get it.................BlackPlague is right, you're kinda fucked.
Old 03-14-06, 08:42 PM
  #6  
Junior Member

Thread Starter
 
Tencma's Avatar
 
Join Date: Mar 2006
Location: ks
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
may try the cpu. i checked for power at the back of the key. Nope I tred following the wires from there back but got to dark. I going to have to look up a wirring diagram
Old 03-15-06, 01:49 PM
  #7  
Junior Member

Thread Starter
 
Tencma's Avatar
 
Join Date: Mar 2006
Location: ks
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
ok theres power to the cpu but I dont know what wire's are what. Dose anyone know if there are any wire's that come from the cpu to somethen that connets to the key?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM
cam_7779
2nd Generation Specific (1986-1992)
9
08-18-15 07:48 AM
sYnth.
New Member RX-7 Technical
2
08-17-15 07:28 PM



Quick Reply: car has no power? wont start



All times are GMT -5. The time now is 08:06 PM.