DREYKO

im going to install a safc one and i cant find any guide even by searching. all the pics i found were outdated and gone.

i just heard the manual is wrong.

i also heard you can hook the blue wire to your o2 sensor and itll give you a read out you can tune by

thanks

Russ-R

FYI the manual isnt wrong, I would post a pic but no camera >_<

Project88Turbo

iTrader: (22)

Write-up!

Here's a link to my write-up from when I installed E-manage on my old car. You should be able to use the diagram to hook up your safc. Make sure on your SAFC that you hook up the ground wires properly, you hook the two different ground wires from the SAFC to the same ground wire on the ECU harness some distance apart. It allows it to measure voltage properly.

Vince

dwb87

iTrader: (22)

I found this on http://www.1300cc.com
It is for the Apexi S-AFC



Red: power
Black: ground
Brown : ground
Green: RPM
Yellow: Air flow meter output (ECU side)
White: Air flow meter input (AFM side)
Grey: TPS (throttle)

If you want to check out the whole install yourself... go to the site and click "2ND GENERATION" then "ENGINE PERFORMANCE" and then "Apexi S-afc fuel computer install"