JonEQuest

This is a manifold from e-bay that looks nice but it is only for the FD's, why won't it fit our cars?

Mark'sMazda

The FD intake minifold stays much closer to the engine than the s4/s5 ones do. Your turbo would hit the intake manifold.

Ryde _Or_Die

They talked about this before in the single turbo section about a month ago. Anyways, it WILL bolt up. The question is really whether the turbo will bolt up/hit anything I believe. They have the same bolt patterns for the manifold to go to. And I forgot which way, but they said you can put one from one car on the other, but not the other way around. I'll see if I can find it for you.

dr0x

As said, they bolt up. But it depends on the turbo if youll need to put a spacer between the manifold and the engine. If its a close fit, you could get away w/ longer manifold studs, a second gasket and another flange from racing beat or w/e.

Ryde _Or_Die

Here you go:

https://www.rx7club.com/forum/showth...t=manifold+for

JonEQuest

Thanks.

MaTT_FoULk

Just get an HKS cast manifold, they aren't that expensive.

JonEQuest

Will that fit my vert OK?

John

13bpower

Are you talking straped on to a N/A engine or on a TII engine?

JonEQuest

NA engine, 6 port.