A/C removal guide
08-16-02, 02:00 PM
#2
Round&Round not Up&Down
Join Date: Aug 2001
Location: West Bloomfield, MI
Posts: 2,805
Likes: 0
Received 0 Likes
on
0 Posts
1. lift hood and prop open with hood rod.
2. locate A/C compressor.
3. Cut A/C belt.
4. remove A/C compressor. Watch for refridgerant, it will freeze your fingers to your tools.
5. remove all lines associated with the A/C system.
6. locate A/C condensor in front of radiator.
7. remove condensor.
8. locate A/C drier near coolant overflow tank.
9. remove drier.
10. leave the coil in the passenger compartment inplace unless you have the accordian piece that connects the blower motor to the remaining HVAC system.
Very straight forward.
2. locate A/C compressor.
3. Cut A/C belt.
4. remove A/C compressor. Watch for refridgerant, it will freeze your fingers to your tools.
5. remove all lines associated with the A/C system.
6. locate A/C condensor in front of radiator.
7. remove condensor.
8. locate A/C drier near coolant overflow tank.
9. remove drier.
10. leave the coil in the passenger compartment inplace unless you have the accordian piece that connects the blower motor to the remaining HVAC system.
Very straight forward.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM
