a/c blower motor quit on me... i slide the switch to turn the blowermotor/a/c on and it does a clickity clikity click(relay)sound.therefore i cannot use my a/c... what do you think is wrong and how can i fix it? thank you
jack

 

Please only hit the submit once... I deleted your 4 duplicate threads on this

 

Sounds like the motor is spinning but not spinning the fan. Mine was doing this after I took it out and cleaned the motor internally. It worked great for a few days then just started going click click click while it was one and not getting any air. Turns out the shaft that goes through the fan ( not round, it's round with two opposite sides flattened and goes through a hole of the same shape on the fan) side was eaten away by the shaft so it didn't have anything to hold onto anymore.

I just fixed this yesterday but drilling a hole in the shaft. Putting a nail through in and smashing the end to hold it in place then using a dremel to cut out a slice form the fan to hold it there. then put it back together and it's works great now. though the fan is about 3 mm askew it still works great.

EDIT: If you hold the bottom of the motor while it's turned on you should be able to tell if this is the case. You'll feel it spinning.

 

SORRY ICEMARK... my computer was saying try again b/c the forum was busy so i had to keep trying... sorry


thanks chimeron i will check this... but im not sure if this is my problem.... i will still check though b/c who knows...
thanks again