2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

bushings.....

Thread Tools
 
Search this Thread
 
Old May 8, 2005 | 10:01 PM
  #1  
Ricer240sx's Avatar
Thread Starter
Army Strong...or somethin
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jan 2004
Posts: 857
Likes: 0
From: Green Bay, WI
bushings.....

ok, so my car, when cruising down the highway, tends to sway back and forth becasue something is loose in teh rear end. i thought it was the toe steer bushings, so i replaced them with the Racing beat units off of mazda trix. now it only seems to do it when its wet, or im really pushing it........so, what i want to do is replace ALL busings in the back with polly urathan replacements!

so, with this post i would like to know if someone could point me to a place where i can order all the bushings in the rear from?? i cant seem to find anything other than factory replacement or just the rear steer eliminators, which i already have lol

o, and while ur at it, could u show me where to find either supernow tie rod ends or the GP sports Super angle kit (im pretty sure thats what its called......lol)

thanx in advance!!
Reply
Old May 9, 2005 | 04:02 AM
  #2  
Turbo2FC3S's Avatar
Touge FC3S
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2003
Posts: 400
Likes: 0
From: So Cal
the Energy Suspension kit comes with a bunch of bushings. http://www.oldtimecandy.com/images/c...vors_small.jpg
these bushings are not included in the kit http://cgi.ebay.com/ebaymotors/ws/eB...category=33731
and also these http://cgi.ebay.com/ebaymotors/ws/eB...category=42609

you already installed the rear toe eliminators, so these should take care of everything.
Reply
Old May 9, 2005 | 07:47 AM
  #3  
Ricer240sx's Avatar
Thread Starter
Army Strong...or somethin
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jan 2004
Posts: 857
Likes: 0
From: Green Bay, WI
that first link was for some candy lol and i also forgot to mention, i got suspencison tech. sway bars so i dont need sway bar bushings, which leaves me with like one bushing needed in the rear from the es kit if that from what i saw.........

and thanx for postin the subframe and diff mounts!!
Reply
Old May 9, 2005 | 08:29 AM
  #4  
JerryLH3's Avatar
Rabbit hole specialist
Tenured Member: 25 Years
Community Favorite
iTrader: (11)
 
Joined: Feb 2001
Posts: 2,852
Likes: 225
From: Tampa, FL
You can order individually from this page if you just want to do the rear. However, our cars are getting pretty old, so why not replace all of them?

http://www.suspension.com/mazda.htm
Reply
Old May 9, 2005 | 08:48 AM
  #5  
Ricer240sx's Avatar
Thread Starter
Army Strong...or somethin
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jan 2004
Posts: 857
Likes: 0
From: Green Bay, WI
yeah, might as well, i just done want to buy the sway bar bushings casue i have no use for them. the sus. tech. bars are thicker and come with there own bushings ya know?
Reply
Old May 9, 2005 | 08:51 AM
  #6  
Ricer240sx's Avatar
Thread Starter
Army Strong...or somethin
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jan 2004
Posts: 857
Likes: 0
From: Green Bay, WI
anyone got any ifo on the tie rod ends though??
Reply
Old May 9, 2005 | 10:44 AM
  #7  
oakback's Avatar
meh
Tenured Member 20 Years
 
Joined: Sep 2002
Posts: 801
Likes: 0
From: Tallahassee
I got my kit from here: http://www.rx-7parts.com/product_inf...roducts_id/251
I have the tie rod end boots that came with the kit, but didn't use them. If you want them I can send them out to you for cheap.
Reply
Old May 9, 2005 | 11:32 AM
  #8  
Ricer240sx's Avatar
Thread Starter
Army Strong...or somethin
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jan 2004
Posts: 857
Likes: 0
From: Green Bay, WI
i dont care about the boost either, i was talkinga bout the super now tie rod ends or the GP sports wide angle kit
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jolie7
3rd Generation Specific (1993-2002)
20
May 1, 2005 06:54 PM




All times are GMT -5. The time now is 12:34 AM.