2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

bunk tps?

Thread Tools
 
Search this Thread
 
Old 04-24-05, 11:19 PM
  #1  
Ihre Papieren, Bitte?

Thread Starter
iTrader: (1)
 
Wanked_FC's Avatar
 
Join Date: Dec 2002
Location: Communist IL
Posts: 1,006
Likes: 0
Received 1 Like on 1 Post
bunk tps?

After finally getting my car running, its surging at idle. I set the idle at 750 and it does ok, but if i hold the gas at 1500rpm it starts surging, up and down about once a second about 500 rpms (250 each way). It doesnt do that with the tps unplugged. I adjusted my tps, 1k ohm at idle, it peaks at about 4.5kohm right near 18 degree throttle but then jumps to no load after that. My tps is bunk isnt it? Its supposed to stay at the 4k-6kohm range at wot isnt it? S4 turbo II.
Old 04-25-05, 12:15 AM
  #2  
I R SAD PANDA W/O BAW

 
ilike2eatricers's Avatar
 
Join Date: Nov 2002
Location: bay area
Posts: 6,061
Likes: 0
Received 1 Like on 1 Post
Yes 4k-6k ohms is the specified range for WOT. Sounds dead to me. Looks like you got everything nailed down.
Old 04-25-05, 12:24 AM
  #3  
Ihre Papieren, Bitte?

Thread Starter
iTrader: (1)
 
Wanked_FC's Avatar
 
Join Date: Dec 2002
Location: Communist IL
Posts: 1,006
Likes: 0
Received 1 Like on 1 Post
one problem after another. at least tps's are cheap.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
Einheri
Single Turbo RX-7's
14
10-07-15 12:23 PM



Quick Reply: bunk tps?



All times are GMT -5. The time now is 07:19 PM.