t all started with a thump/clunk ,so looked under the car and found what looked to be a bad bushing on the diff mount so i order a new one and when i was taking the old one off i found that the bushing was not the problrm at all!! it was a broken mount on the subframe (the on were the two studs slide in the slots ) is there a way i can take it to a welder and get it welded back on?
here is a pice of the broken 1 http://photobucket.com/albums/f243/...ent=BROKEN1.jpg

And also has any one ever had one of these locks on there http://photobucket.com/albums/f243/...urrent=LOCK.jpg

 

Pictures don't work.

 

This happens quite often, the search feature works wonders too.

This happened to me. Here is my old thread https://www.rx7club.com/2nd-generation-specific-1986-1992-17/i-destroyed-my-diff-mounts-440768/

 

Funny you posted in here Jason... Not long after it happened to ^him^ it happened to me as well... He got a new subframe off me and installed it... When it happened to me, I just welded it and welded some braces in to make sure it would never happen again... Sort of an upgrade actually... Car feels much more solid than it ever did...