rex_7_87_t2

hey... well my brakes dont work..Its almost a new system... I have replaced the calipers and the rotors as well as the master cylinder.... I made sure I bleed everything properly... I Benched bleed the master cylinder then I bleed the rest of the system…There is no air in the lines for sure I have been bleeding no stop thinking thats whats wrong… but yet I still have no brake power… I don’t think my car has a ABS system on it… if it does were is it… I have an 87 T II …. So I was wondering is there anything else i can do to fix it…?? Im going crazy...

Thanks for the help....

VacavilleFC

brake booster is bad???

fusion-turbo

What do you mean by "not work"?

When you press the brake pedal, do the pads press against the rotors? If so, your brake system works, but you have a power booster problem.

If you push the pedal and it goes straight to the ground with no pad movement its a master cylinder problem

More info please

rex_7_87_t2

the brake pads make contact with rotors... Im thinking its the power booster as well... but were and how do i check???

VacavilleFC

sorry i have no clue, you can probably just google it and figure it out,

fusion-turbo

Check the power booster vacuum line that connects to the UIM. Make sure its attatched and has no leaks.

You can test the booster with a vacuum tool i believe.... autozone?