Brakes dont work!!! HELP!!
hey... well my brakes dont work..Its almost a new system... I have replaced the calipers and the rotors as well as the master cylinder.... I made sure I bleed everything properly... I Benched bleed the master cylinder then I bleed the rest of the system…There is no air in the lines for sure I have been bleeding no stop thinking thats whats wrong… but yet I still have no brake power… I don’t think my car has a ABS system on it… if it does were is it… I have an 87 T II …. So I was wondering is there anything else i can do to fix it…?? Im going crazy...
Thanks for the help.... |
brake booster is bad???
|
What do you mean by "not work"?
When you press the brake pedal, do the pads press against the rotors? If so, your brake system works, but you have a power booster problem. If you push the pedal and it goes straight to the ground with no pad movement its a master cylinder problem More info please |
the brake pads make contact with rotors... Im thinking its the power booster as well... but were and how do i check???
|
sorry i have no clue, you can probably just google it and figure it out,
|
Check the power booster vacuum line that connects to the UIM. Make sure its attatched and has no leaks.
You can test the booster with a vacuum tool i believe.... autozone? |
All times are GMT -5. The time now is 07:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands