Brake proportioning valve install?
#1
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Syracuse, New York
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Brake proportioning valve install?
How do I do it properly?
I want to replace the stock valve with a Wilwood adjustable model.
Summit racing #: WIL-260-2220
The problem is that the Wilwood only has one inlet and one outlet. The stock valve has two.
What's the best way to handle this?
Are the left and right rear brakes hydraulically seperated? If so, I would be removing a certain amount of safety by bridging them together, which I'd rather not to.
Should I get two valves? This seems like it could cause more problems than it might solve.
I want to replace the stock valve with a Wilwood adjustable model.
Summit racing #: WIL-260-2220
The problem is that the Wilwood only has one inlet and one outlet. The stock valve has two.
What's the best way to handle this?
Are the left and right rear brakes hydraulically seperated? If so, I would be removing a certain amount of safety by bridging them together, which I'd rather not to.
Should I get two valves? This seems like it could cause more problems than it might solve.
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The rear brakes are on a common line, and seperate just infront of the rear subframe. I can't picture the valve in my head, so I can't tell you how to connect the new one....Anyone have a picture?
#4
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Syracuse, New York
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Aaron Cake
The rear brakes are on a common line, and seperate just infront of the rear subframe. I can't picture the valve in my head, so I can't tell you how to connect the new one....Anyone have a picture?
The rear brakes are on a common line, and seperate just infront of the rear subframe. I can't picture the valve in my head, so I can't tell you how to connect the new one....Anyone have a picture?
I'll take another look under the hood and follow the lines to see for sure.
#6
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Syracuse, New York
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
You're right. My ghetto u-bolt fix for a supposedly leaking reservoir had obscured the big "F" and "R" next to the lines on the stock valve.
Duh..
Thanks.
Duh..
Thanks.
#7
Senior Member
Thread Starter
Join Date: Sep 2003
Location: Syracuse, New York
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
Install done.
I modified the stock prop. valve bracket to hold the Wilwood unit by bending down the metal "finger" that keeps the stock unit from rotating and cutting it shorter.
I replaced the stock line from the R on the master cylinder with a custom 3/16" line with a metric double flare on one end and an american double flare on the other.
I replaced the front portion of the stock valve with a metric union.
I made a another line which connects to the R output of the stock valve, loops around and goes into the Wilwood valve. It was metric on one end and american on the other side. A metric union was used to join this line to the stock line, which goes to the back of the car.
Now I need somewhere slippery to adjust it.....
I modified the stock prop. valve bracket to hold the Wilwood unit by bending down the metal "finger" that keeps the stock unit from rotating and cutting it shorter.
I replaced the stock line from the R on the master cylinder with a custom 3/16" line with a metric double flare on one end and an american double flare on the other.
I replaced the front portion of the stock valve with a metric union.
I made a another line which connects to the R output of the stock valve, loops around and goes into the Wilwood valve. It was metric on one end and american on the other side. A metric union was used to join this line to the stock line, which goes to the back of the car.
Now I need somewhere slippery to adjust it.....
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM