Bought my first RX-7
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Finland
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Bought my first RX-7
Hi all!
I bought few weeks ago my first RX-7. It's a -87 Turbo II with 147000kms behind and still going strong. I have changed all the fluids and thermostat beacuse it was jammed open . I read at this forum about bad solder joints, which I also had and I resoldered the "idiot" cluster and CPU.
I have couple pictures at irc-galleria: http://irc-galleria.net/view.php?nic...ge_id=67647231
It came from Germany so it still has those german "moving plates" or what they are called...
So far I have been very impressed with my new car, especially it's handling. This winter, perhaps, I am going to rebuild the engine and fabricate a new downpipe and exhaust system. Perhaps some other mods too.
-Pekuman
I bought few weeks ago my first RX-7. It's a -87 Turbo II with 147000kms behind and still going strong. I have changed all the fluids and thermostat beacuse it was jammed open . I read at this forum about bad solder joints, which I also had and I resoldered the "idiot" cluster and CPU.
I have couple pictures at irc-galleria: http://irc-galleria.net/view.php?nic...ge_id=67647231
It came from Germany so it still has those german "moving plates" or what they are called...
So far I have been very impressed with my new car, especially it's handling. This winter, perhaps, I am going to rebuild the engine and fabricate a new downpipe and exhaust system. Perhaps some other mods too.
-Pekuman
#2
Full Member
Join Date: Sep 2007
Location: Elmira, Ny
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Welcome... I just got my first RX7 also I need to resolder my idiot lights also. Did you just heat the solder or Put new solder on? My idiot lights are bad... They like are very dim and sometimes dont work at all.
#4
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Finland
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I am a quite a big fan of Initial D, so that also inpired me to buy this nice car!
#6
Caramelldansen
Join Date: May 2005
Location: SF Bay Area, California
Posts: 1,182
Received 0 Likes
on
0 Posts
Hi all!
I bought few weeks ago my first RX-7. It's a -87 Turbo II with 147000kms behind and still going strong. I have changed all the fluids and thermostat beacuse it was jammed open . I read at this forum about bad solder joints, which I also had and I resoldered the "idiot" cluster and CPU.
I have couple pictures at irc-galleria: http://irc-galleria.net/view.php?nic...ge_id=67647231
It came from Germany so it still has those german "moving plates" or what they are called...
So far I have been very impressed with my new car, especially it's handling. This winter, perhaps, I am going to rebuild the engine and fabricate a new downpipe and exhaust system. Perhaps some other mods too.
-Pekuman
I bought few weeks ago my first RX-7. It's a -87 Turbo II with 147000kms behind and still going strong. I have changed all the fluids and thermostat beacuse it was jammed open . I read at this forum about bad solder joints, which I also had and I resoldered the "idiot" cluster and CPU.
I have couple pictures at irc-galleria: http://irc-galleria.net/view.php?nic...ge_id=67647231
It came from Germany so it still has those german "moving plates" or what they are called...
So far I have been very impressed with my new car, especially it's handling. This winter, perhaps, I am going to rebuild the engine and fabricate a new downpipe and exhaust system. Perhaps some other mods too.
-Pekuman
Trending Topics
#11
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Finland
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
This is not my first experience with RX:s. Lately I have had a chance to build a FD for my friend and FB for another one. I was quite sceptical at first towards wankel, but it kind of a grew in me , so finally I HAD to get a RX-7 . My RX-7 was in quite a good condition, except those outer window seals were rusty and some bumps and few scuffs around. This winter I am going to sort those out and perhaps change the colour to something better(white?). And the interior is going to get some colour changes too...
Eple, that's correct, only England and Ireland are RHD in europe.
This is not my first experience with RX:s. Lately I have had a chance to build a FD for my friend and FB for another one. I was quite sceptical at first towards wankel, but it kind of a grew in me , so finally I HAD to get a RX-7 . My RX-7 was in quite a good condition, except those outer window seals were rusty and some bumps and few scuffs around. This winter I am going to sort those out and perhaps change the colour to something better(white?). And the interior is going to get some colour changes too...
Eple, that's correct, only England and Ireland are RHD in europe.
#12
Full Member
Join Date: Sep 2007
Location: Elmira, Ny
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Yup I resoldered the dummy lights and cpu and all works fine the only thing is the speaker in the cpu is like blown or something. It didnt work untill i resoldered it and now its real faint and crackly. Im just going to solder in a computer bios speaker since its the same thing. It might be a different tone but I dont care I wouldnt go white..... Im changing my color to like gloss black or Metallic baby blue.
Last edited by thebigbluecan; 10-08-07 at 02:22 AM.
Thread
Thread Starter
Forum
Replies
Last Post