Bosch +2 Plugs
#29
Former Moderator. RIP Icemark.
Originally posted by wozzoom
Icemark: These Denso plugs, are they the same plugs that the RX-8 is running?
Icemark: These Denso plugs, are they the same plugs that the RX-8 is running?
The IRE01-31 is about 2 steps colder, and is what is suggested for the trailing plugs, both in the FC and FD
#30
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally posted by Icemark
I don't know for sure, but I suspect they are, just based on price.
The IRE01-31 is about 2 steps colder, and is what is suggested for the trailing plugs, both in the FC and FD
I don't know for sure, but I suspect they are, just based on price.
The IRE01-31 is about 2 steps colder, and is what is suggested for the trailing plugs, both in the FC and FD
I'm still trying to find a vendor out there that sells the NGK RX-8 plug.
#31
Senior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Feb 2004
Location: Austin, Texas
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Icemark: so if I replace my sparks with these Densos (part numbers for trailing and leading would be cool
) I should have around a 5hp gain at least? my sparks are probably falling apart so it would most likely be higher.
Also, which do you suggest, iridium, platinum? what and why?
thanks
![Wink](https://www.rx7club.com/images/smilies/wink.gif)
Also, which do you suggest, iridium, platinum? what and why?
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
#32
Former Moderator. RIP Icemark.
Originally posted by wozzoom
I just downloaded the Owners Manual for the RX-8. It's listing an NGK RE9B-T and a RE6A-L (or RE7A-L) in the specifications page. It also says they are Iridium plugs.
I'm still trying to find a vendor out there that sells the NGK RX-8 plug.
I just downloaded the Owners Manual for the RX-8. It's listing an NGK RE9B-T and a RE6A-L (or RE7A-L) in the specifications page. It also says they are Iridium plugs.
I'm still trying to find a vendor out there that sells the NGK RX-8 plug.
#33
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally posted by Icemark
I sent a couple of emails out to a couple different NGK vendors, let me see what they can do.
I sent a couple of emails out to a couple different NGK vendors, let me see what they can do.
On a side note, what CDI setup are you running on your vert that you're burning plugs so fast?
Thread
Thread Starter
Forum
Replies
Last Post