boost gauge and coolant tmp. gauge not working
02-04-06, 12:56 AM
#1
Full Member
Thread Starter
Join Date: Dec 2004
Location: 310
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
boost gauge and coolant tmp. gauge not working
My stock boost gauge and engine temp gauge dont work!!! when i turn the car on they dont even move they are just dead. sometimes when i have the lights on the dash lights turn off. what gives?
02-04-06, 02:14 PM
#4
Full Member
Thread Starter
Join Date: Dec 2004
Location: 310
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
i checked the fuses and they seemed ok. which one should i check? you said to check the harness at the computer? how do i do that? its exposed and everything seems fine but i dont know... its kinda freaking me out
02-04-06, 03:27 PM
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
The water temp gauge and the boost gauge are fed independently. No common fuse b/t them.
So pull the gauge cluster off and ring the wires out from the cluster to the unit your interested in.
I'd start with the boost gauge. It shares the output wire of the boost/pressure sensor wtih the ECU. No signal to the ECU could spell curtains for your engine some day. Free fsm available online with schematics.
So pull the gauge cluster off and ring the wires out from the cluster to the unit your interested in.
I'd start with the boost gauge. It shares the output wire of the boost/pressure sensor wtih the ECU. No signal to the ECU could spell curtains for your engine some day. Free fsm available online with schematics.