boost controller instal help
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Jul 2002
Location: Indy, IN
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
boost controller instal help
hey guys, i got a boost controller (profec B) used off someone, so i didn't get instructions, which "tube" am i supposed ot bypass with the boost controller?
thanks.
thanks.
#2
Rotary Enthusiast
I'm not entrirely sure about the Profec B but it should alter what the wastegate sees from the turbo. So you'll see a short hose going from the compressor side of the turbo to the wastegate actuator. This should be the hose you'll need to use.
Good luck. Helpful aint I!
Good luck. Helpful aint I!
#5
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Hey there. What part are you confused about?
Basically you just need to find the hose going to the wastegate and imagine it cut in half. Now stick the PROFEC in between them and you are pretty much done. You may need a manifold pressure hose so the PROFEC can read the boost and vacuum though.
Basically you just need to find the hose going to the wastegate and imagine it cut in half. Now stick the PROFEC in between them and you are pretty much done. You may need a manifold pressure hose so the PROFEC can read the boost and vacuum though.