2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

BNR Stage 4 + stock ECU?

Old 01-22-12 | 05:07 AM
  #1  
dwb87's Avatar
Thread Starter
This is my social media.
iTrader: (22)
 
Joined: Jan 2006
Posts: 2,744
Likes: 0
From: WA
BNR Stage 4 + stock ECU?

Do you think it woud be a problem to run a BNR Stage 4 turbo with the stock S4 TII ECU, top mount, stock MAP sensor, etc...?
Old 01-22-12 | 05:19 AM
  #2  
jerd_hambone's Avatar
Rotary Enthusiast
 
Joined: Jan 2005
Posts: 1,482
Likes: 0
From: Good Ol' Ky
I, personally, wouldn't. I guess it could be possible. But the real question is why?
Old 01-22-12 | 05:28 AM
  #3  
dwb87's Avatar
Thread Starter
This is my social media.
iTrader: (22)
 
Joined: Jan 2006
Posts: 2,744
Likes: 0
From: WA
I knew "Why?" was coming... Looking to downgrade to be honest. I cannot afford to get my Power FC repaired at the moment. Perhaps I should just go back to the stock turbo.
Old 01-22-12 | 09:31 AM
  #4  
J5sense's Avatar
Senior Member
iTrader: (3)
 
Joined: Jun 2011
Posts: 420
Likes: 1
From: West Chicago
for cheap at least get some 720cc injectors off ebay in and have rtek installed on your pcm.

http://www.pocketlogger.com/index.ph...age=1&ecu=S4T2

for its money rtek is cheap
Old 01-22-12 | 11:53 AM
  #5  
misterstyx69's Avatar
Retired Moderator, RIP
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 133
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
you are gonna run out of fuel..and BOOM!
Old 01-22-12 | 12:13 PM
  #6  
13bpower's Avatar
s4 for life
 
Joined: May 2002
Posts: 2,516
Likes: 1
From: Oahu
With the stock ECU it will go boom. At the very least you need a piggy back fuel controller like the SAFC. Then you would need to keep the boost as low as possible and get someone who is an absolute master at tuning a rotary to even attempt tuning a stage 4 on the stock ecu with a piggy back. One mistake in the tuning process and boom. In the end a safc and tune is going to run you $500+ so the only "free" way to get your car up and running for the time being is putting your stock turbo and ecu back in.
Old 01-22-12 | 06:49 PM
  #7  
sharingan 19's Avatar
Rotary Revolutionary
iTrader: (16)
 
Joined: May 2006
Posts: 3,881
Likes: 2
From: Jacksonville, Tampa & Tallahassee
Part out thread in.......10.....9......8
Old 01-22-12 | 08:37 PM
  #8  
j9fd3s's Avatar
Moderator
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,191
Likes: 2,824
From: https://www2.mazda.com/en/100th/
it could be done, but you'd need to run boost as low as possible, and even then it'll probably be lean up top. more fuel would be a great idea, FD pumps are usually almost free. bigger injectors would help.

it would also probably help to restrict the exhaust or intake...
Old 01-22-12 | 09:14 PM
  #9  
DasJuicebox's Avatar
Junior Member
 
Joined: May 2010
Posts: 26
Likes: 0
From: Northern Ohio
put a stock turbo back on until your ready to get proper fuel. not worth it to risk your setup when you have the things you need to make it work properly, save the money and do it correctly.
Old 01-22-12 | 09:47 PM
  #10  
dwb87's Avatar
Thread Starter
This is my social media.
iTrader: (22)
 
Joined: Jan 2006
Posts: 2,744
Likes: 0
From: WA
Originally Posted by sharingan 19
Part out thread in.......10.....9......8
Hahaha! Already kind of started that... Looking to just go back to the stock set-up for aftermarket parts. I really don't have the money, and do not want to part with my car. :-/

I have a Walbro, 720cc primaries, and 1,600cc secondaries. So, I have enough fuel... Yeah. I suppose going back to the stock set-up will be the answer for now.
Old 01-23-12 | 12:38 AM
  #11  
Digi7ech's Avatar
I break Diff mounts
iTrader: (1)
 
Joined: Jun 2002
Posts: 4,403
Likes: 4
From: Avondale, Arizona
The only way this car would run this way is if you revert back to stock injectors and don't pipe the turbo to the intake(aka run it NA).

This is why people call our cars unreliable. People do stupid things like this.
Old 01-23-12 | 02:43 AM
  #12  
dwb87's Avatar
Thread Starter
This is my social media.
iTrader: (22)
 
Joined: Jan 2006
Posts: 2,744
Likes: 0
From: WA
Originally Posted by Digi7ech
The only way this car would run this way is if you revert back to stock injectors and don't pipe the turbo to the intake(aka run it NA).
What? People have ran their cars this way??

Originally Posted by Digi7ech
This is why people call our cars unreliable. People do stupid things like this.
I'm not looking to **** my car up. This was just a question... I'm feeling out my options at this time. I've been looking for opnions and alternatives to get my car back on the road.
Old 01-23-12 | 11:34 AM
  #13  
j9fd3s's Avatar
Moderator
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,191
Likes: 2,824
From: https://www2.mazda.com/en/100th/
Originally Posted by Digi7ech
The only way this car would run this way is if you revert back to stock injectors and don't pipe the turbo to the intake(aka run it NA).

This is why people call our cars unreliable. People do stupid things like this.
the turbo would explode in like 23 seconds, without the engine to pump against, it'll severely overspeed. much better to restrict the exhaust or intake.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
05-30-19 08:47 PM
incubuseva
2nd Generation Specific (1986-1992)
14
09-03-15 12:37 PM


Thread Tools
Search this Thread
Quick Reply: BNR Stage 4 + stock ECU?



All times are GMT -5. The time now is 05:48 PM.