Well im haveing a problem with my blinkers i just bought the car for 600 and its the gtu model. but when i hit the switch i can hear the flasher clicking but nothing shows on the dash and nothing outside the car. i dont understand what the problem is cuz in my mind if the switch was bad the flasher wouldnt make any noise. my brakelights work and my parking lights work but my turns signals do not and neither does the hazards. plz help me.

I would also like to see if anyone has the a rx7 with a back seat. if so contact me and i would like to work something out for it. i have storage bins and i want to have a back seat. thx

 

You are low on blinker fluid

Actually, the problem could lie in the body CPU, particularly the flasher unit. They can be had from Mazdatrix.com under the Electrical section.

 

the noise is from the flasher relay all the switch does is activate the relay so there is either no power going to the relay. no ground at your lights, or you hazzard button isn't plugged in. check those things first then worry about control modules

 

I'd check fuses first. What have you checked so far?

 

have the bulbs been checked?

Do the turn signal indicators on the dash board light up?

Have the fuses been checked?

 

hahaha i got it fixed weird cuse im a mechanic and i would think to check the fuses the problem was the hazard fuse it there wasnt one in the slot weird i should slap myself doy!@# thx for the info glad it wasnt the BCM