fc323

I recently went to ASC to get some arp studs pressed into the front hubs, now the studs dont line up with the wheel holes.
Is it possible that they bent the hubs, and can they be unbent or can i try reinstalling the studs to reseat them?

LargeOrangeFont

iTrader: (7)

They didn't press the studs in squarely. Get a few washers and some sacrificial lug nuts. Put on the washers with some grease between them and grease on the studs and tighten the lug nut down until it stops.

fc323

Sweet, thank you. I'm going to try it right now