Bac valve problems
04-16-02, 04:18 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: virgina
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Bac valve problems
I was wondering if any other rx7 owners have experienced this problem. MY 87 rx7 turbo 2 bac doesent seem to drop rpm when i pull the connection from the bottom. I thought this could be a short or a prealude to a bad bac any advice would be much appreciated thanx
04-16-02, 04:26 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
This article http://www.teamfc3s.org/info/articles/idle.html and look down toward the bottom of the article. Applies to turbo and non=turbo. I had a ECU problem and fixed it according to this article. He gives part numbers that can be had a RadiosShack for a buck or two. Easy solder job after removing the transistor.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
