bac n332 question
#1
Full Member
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Othello washington
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
bac n332 question
When i first bought the seven the bac had been removed now im finaly trying to put it back on but im not sure which wires to use. I searched and found it is black/white and blue/green. i tried it with the key on the ON position but got nothing also i have two other wires im not to sure what they go to ok picture time hope it helps!
#2
Are you experienced?
iTrader: (18)
The blue/green and black/white wires are what are used to power the BAC. Check voltage at the wires and make sure you get something. Black/white is common ground for the sensors.
The only wire I could find in the manual for black/red would be a wire for the metering oil pump.
The only wire I could find in the manual for black/red would be a wire for the metering oil pump.
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM