Avg price on a rebuild?
#1
Newbie
Thread Starter
Join Date: Oct 2002
Location: Miami
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Avg price on a rebuild?
Hi all,
I was looking for a daily beater and came across a '88 Turbo II for $1500. It already has a few bolt-ons and street ported, but the person says that the engine needs to be rebuilt.
Out of curiosity can someone post a link or give me a basic run-down on how a rotary engine is "rebuilt" and the average cost it might be for a shop to do this.
Thanks!
I was looking for a daily beater and came across a '88 Turbo II for $1500. It already has a few bolt-ons and street ported, but the person says that the engine needs to be rebuilt.
Out of curiosity can someone post a link or give me a basic run-down on how a rotary engine is "rebuilt" and the average cost it might be for a shop to do this.
Thanks!
#2
Senior Member
Join Date: Sep 2002
Location: Washington
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
www.atkinsrotary.com
They have a video that will take you step by step on how to rebuild a 13b and what you will need. It tells you what tools, and all the parts. It even tells you how to measure certain parts to see if you have to replace them or not.
They have a video that will take you step by step on how to rebuild a 13b and what you will need. It tells you what tools, and all the parts. It even tells you how to measure certain parts to see if you have to replace them or not.
#4
What Subscription?
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
#6
Senior Member
Join Date: Sep 2002
Location: Washington
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
I have a question about rebuilding motors... I posted this in the fc3s forum so this is just a copy and paste here.
Im wondering about getting a rebuilt engine, I have right now a 13bt and the rear rotor apex seals blew out and I think the whole rear section of the motor is gone, (the rotor was kinda scared from the apex seal that broke so I figure the housing and all must be too)But the front half of the motor seems to be fine (has good compression and rotor looks good.(engine is still together I looked thru the exaust port) Now is what I want to do is take this engine and make it a n/a by putting n/a rotors in it and getting it street ported.
What Im thinking is mabee sending it to you guys and have you guys port it and instead of building it for me just getting the parts all together and sending it to me. What do you guys think, and how much do you think it would cost?
This motor will go into a s5 with a weber dcoe kind of deal.
This question goes out to anyone...
Im wondering about getting a rebuilt engine, I have right now a 13bt and the rear rotor apex seals blew out and I think the whole rear section of the motor is gone, (the rotor was kinda scared from the apex seal that broke so I figure the housing and all must be too)But the front half of the motor seems to be fine (has good compression and rotor looks good.(engine is still together I looked thru the exaust port) Now is what I want to do is take this engine and make it a n/a by putting n/a rotors in it and getting it street ported.
What Im thinking is mabee sending it to you guys and have you guys port it and instead of building it for me just getting the parts all together and sending it to me. What do you guys think, and how much do you think it would cost?
This motor will go into a s5 with a weber dcoe kind of deal.
This question goes out to anyone...
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rxmiles
3rd Generation Specific (1993-2002)
9
08-24-15 02:07 PM
JIMMY54
1st Generation Specific (1979-1985)
2
08-12-15 05:40 PM