nopistons85

i see thie topic is covered alot but i did not find a thread that covers my specific problem.

86 gxl with new exhaust system from headers back. No cats, just test pipe. So obviously there is no split air tube to go from the cat to the aux port ( rear one closest to firewall ) ive tapped into the hose off the air pump and that seems to open the port closest to the firewall, but the port on the front of the motor, closest to the air pump, and 10 thousand times more of a pain in the dick to get to is not moving. i will watch the ports as i increase RPms with the throttle cable and i see the one in the back opens what i assume properly, but the front port does not move or open at all.

1. since i have no cats and a full stainless 3" exhaust i get ALOT of complaints about noise in my little town, so today i went and ordered an OEM CaT just to quiet it down a little ( and make it legal at least ) I will hook the ports back up correctly like they are SUPPOSED to be, but im afraid from having no cat and the ports not opening for a long time untill i rigged it the way it is that front port is seized right up, what do u recommend i do about this one port not opening?