auto to manual tranny
07-23-02, 05:43 PM
#3
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Yes, searching is a good idea.
The conversion is NOT easy, as you need to fabricate custom transmission mounts because the underside of the body is not the same and the stock MT mounts will not fit. If you can weld, then this will not be a problem. If you can't weld, and your AT works OK, then I suggest selling your car and buying one with an MT.
The conversion is NOT easy, as you need to fabricate custom transmission mounts because the underside of the body is not the same and the stock MT mounts will not fit. If you can weld, then this will not be a problem. If you can't weld, and your AT works OK, then I suggest selling your car and buying one with an MT.
07-24-02, 11:44 PM
#4
Junior Member
Join Date: Jul 2002
Location: hanford california
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
rotaryresurrection makes conversion mounts for $40. the hardest part i think would be the wiring, pedals, and driveplate removal
go to hypntyz.rx7life.com
youll see everything you need to know
go to hypntyz.rx7life.com
youll see everything you need to know