I hate to bother everyone with this but i noticed that in the Complete Automatic to Manual Conversion Write UP that you remove the auto counter weight but what i want to know is there a manual counter weight i should be putting on or is the flywheel the only weight.(I have a stock 5 speed flywheel) Once again thanks for your time.

 

You have to remove it if you are using a stock flywheel. The counter is built into it. Unless you bolt on an aftermarket light flywheel. Then you can bolt it right to the counter wieght.

 

Thanks so much thats all that was holding me up from finshing my conversion I got a diffrent Idea for the mounts my did used to build race cars for dirt tracks so i will post up the pics when i get it snuged up

 

I eagerly await pics, especially of how you hold the transmission in place

I plan to do this as well.