I've been searching for exactly how to do these tricks.

I have found people that use one of the three and tell everyone else to do the same.

I have also found people who tell everyone else that these methods are crap and recommend using a different one.

So far the one method that is standing above the rest is the water trick.

Can someone do a write-up about this with good descriptive pics and exactly how to go about doing this trick. Hopefully one that will be archived for easy access.

I have about 7,000 miles on a rebuilt engine and am thinking that my engine could use some carbon treatment.

Thanks!

 

got carbon? go bounce off rev limiter a little >_<

OR you can get a 3 foot long vacuum line, run it off a nipple on the UIM after the TB,put the other end in a half gallon(or whatever size) of water and let it suck it up! Keep in mind you might have to blip the throttle a little bit.