1FastT2

iTrader: (1)

I need to decide which apex seals I want to run in my new motor. I have already bought new factory seals but was wondering if there is a better alternative. I want to stick to the 2mm size cause I am a firm beleiver in the 2mm seals. I will be running a 60-1 TO4 turbo and Haltech on a ported motor. Does anyone have any opinions they can throw my way? Also where do I purchace different seals at?

Node

iTrader: (1)

factories are just as good as most others. Id suggest using the search function as there are mmmmmaaaaaaaaaaaannnnnnnnnnyyyyyy topics about which seals are best.

Scott 89t2

2mm seals are fine. you just have to make sure the gap in the rotors hasn't worn to big where the seals go, other wise you need new rotors or you make the groves a bit bigger and run 3mm.

hawk 7

iTrader: (2)

Never used them but here is a link you may want to check out.

http://www.hurleyrotary.com/