2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Anyone using aem uego wideband

Thread Tools
 
Search this Thread
 
Old Apr 16, 2007 | 09:45 AM
  #1  
alex144407's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Dec 2003
Posts: 80
Likes: 0
From: Alma Quebec
Anyone using aem uego wideband

anyone is using this type of wideband
i want to know your comments about it
any problems with it?

i want to use it on my T2 to tune my fuel with a boost of 12 psi
my mod is: fcd,safc,walbro,4X550cc,mbc,2.5"exhaust
Reply
Old Apr 16, 2007 | 11:08 AM
  #2  
upatnight's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Apr 2005
Posts: 201
Likes: 0
From: royal oak,MI
its great. i have a s5 TII w/ safcII, 3"turbo back, emish block off, 720 secondarys,fcd,and uego wideband.
Reply
Old Apr 16, 2007 | 11:10 AM
  #3  
7dust's Avatar
Irregular Here
Tenured Member: 20 Years
iTrader: (14)
 
Joined: Dec 2003
Posts: 3,075
Likes: 4
From: Alvin, TX
Not so great as it can't read lower than 10.0 AFR.

If you are particularly rich, its difficulty to get an idea of how much.
Reply
Old Apr 16, 2007 | 11:15 AM
  #4  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
Good for the money, easy to install. I have one in both my 7's. Also consider the Innovate LC-1.
Reply
Old Apr 16, 2007 | 07:10 PM
  #5  
alex144407's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Dec 2003
Posts: 80
Likes: 0
From: Alma Quebec
ok thank!

i check for it because its the less expensive i found

and it show a/f ratio directly on the gage
Reply
Old Apr 16, 2007 | 08:12 PM
  #6  
Digi7ech's Avatar
I break Diff mounts
Tenured Member 20 Years
iTrader: (1)
 
Joined: Jun 2002
Posts: 4,403
Likes: 4
From: Avondale, Arizona
Get some 720's(secondaries) an rtek and then check your afr's if you want 12psi reliably.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Logan Reinisch
General Rotary Tech Support
44
Sep 17, 2018 12:20 PM
mulcryant
General Rotary Tech Support
5
Oct 4, 2015 12:18 AM




All times are GMT -5. The time now is 04:38 AM.