Anyone Tried Z32 300ZX Wheels?
#1
ROTARD FOR LIFE!!!
Thread Starter
Anyone Tried Z32 300ZX Wheels?
I found a cheap set of chrome Z32 300zx wheels and wondering what it would take to mount them on the FC? and wondering if it'd look ok. Anyone done this before? Pics? Photochoped pics?
#4
they work and look awsome a guy that works at nissan did the switch...take some rotors and rims from the Z and swap them out thats pretty much the extent of it ...they look awsome more of a mean stance and they still fit in the wheel wells of the car
Trending Topics
#11
D1 Drifter Status
Join Date: Dec 2004
Location: Sacramento CA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
its really nothen too special.. I'll see if i can find any pics of when my car had them on. i remember seeing a picture of a FC on here not too long ago that had them, they were painted black.
#13
Junior Member
Join Date: Jun 2007
Location: Portland, OR
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to bring a post back from the dead here, but Z32 rims really fit? They're 16x7.5 with a 45mm offset front and 16x8.5 with a 35mm offset rear. When I ran the numbers, that sounded like it could cause some nasty rubbing (24mm less front clearance). People have run this without any issues?
#15
Lives on the Forum
You'll need a spacer in front, about 10-15mm. The rear should be fine.
You'll need to check to make sure the center bore is equal to or larger than the FC's.
You'll need to check to make sure the center bore is equal to or larger than the FC's.
#16
Partout Performance
iTrader: (24)
Join Date: Mar 2007
Location: .
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
This is my parts car.
It has Z32 wheels on the left side and steelies on the right side. I got it for 100 bucks. It's a perfect donor car to my black S5 T2. Also the perfect addition to this thread for pictures.
It has Z32 wheels on the left side and steelies on the right side. I got it for 100 bucks. It's a perfect donor car to my black S5 T2. Also the perfect addition to this thread for pictures.
#20
Partout Performance
iTrader: (24)
Join Date: Mar 2007
Location: .
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
I know, it's the wheel from the other side. I only have 2. The car was sold to me like this ><. It doesn't have an engine so it doesn't go anywhere, as long as they hold tire pressure it's mobile!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM