Anyone running FD rims on their FC?
#1
Chad Carson
Thread Starter
iTrader: (29)
Join Date: Nov 2001
Location: South of Nashville TN. USA
Posts: 7,010
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running FD rims on their FC?
If so post pics, if any spacers were used, and what suspension your running.
Picked up a 91 for the wife and well she hates the rims on it so either to run a set of mesh or my factory fd rims.
Picked up a 91 for the wife and well she hates the rims on it so either to run a set of mesh or my factory fd rims.
#2
Information Regurgitator
I know people have done it in the past and they did have to use spacers. Unfortunatley I don't remember what size. It's been talked about many times before.A quick search got this.
https://www.rx7club.com/showthread.p...D+wheels+on+an
https://www.rx7club.com/showthread.p...5&page=1&pp=15
https://www.rx7club.com/showthread.p...D+wheels+on+an
https://www.rx7club.com/showthread.p...5&page=1&pp=15
#3
Senior Member
Join Date: Mar 2002
Location: Logan Utah
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
My spacers that I used for when I had fd rims were 32mm thick and had studs in them so you bolted the spacer on, and then bolted the wheel to the spacer. Lots of autox time with this set up. With this thick of a spacer though, you will need at least one degree of negative camber as you will stick out of the fenders if you do not. my car is in my avatar, but its not all that big if it gives you an idea.
dpf22
dpf22
#5
Former Moderator. RIP Icemark.
Thread closed... covered in the FAQ for FC sticky thread found at the top of this section. Please read the FAQ for FC sticky thread before posting as many of the commonly asked questions (such as the one this thread was started with) are covered there.
Thread
Thread Starter
Forum
Replies
Last Post