If so post pics, if any spacers were used, and what suspension your running.

Picked up a 91 for the wife and well she hates the rims on it so either to run a set of mesh or my factory fd rims.

 

I know people have done it in the past and they did have to use spacers. Unfortunatley I don't remember what size. It's been talked about many times before.A quick search got this.
https://www.rx7club.com/showthread.p...D+wheels+on+an

https://www.rx7club.com/showthread.p...5&page=1&pp=15

 

My spacers that I used for when I had fd rims were 32mm thick and had studs in them so you bolted the spacer on, and then bolted the wheel to the spacer. Lots of autox time with this set up. With this thick of a spacer though, you will need at least one degree of negative camber as you will stick out of the fenders if you do not. my car is in my avatar, but its not all that big if it gives you an idea.


dpf22

 

thanks dak.
I could not remember if it was 20mm all the way.
Chad

 

Thread closed... covered in the FAQ for FC sticky thread found at the top of this section. Please read the FAQ for FC sticky thread before posting as many of the commonly asked questions (such as the one this thread was started with) are covered there.