Anyone know about recaro seats
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2007
Location: California
Posts: 1,026
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know about recaro seats
Hi, does anyone know about how to get a hold of a recaro seats that fit for FC. what kind of rail bracket does it need. Stuff that need to be done to get the seats on the FC. thanks
#2
https://www.rx7club.com/showthread.p...ghlight=recaro interior/exterior/audio section will help more probably.
#3
Rotary Freak
iTrader: (7)
I picked up a set of Recaro's from pole position when they used to sell them. I used rails and brackets from Wedge Engineering. I had to widen the holes on the brackets a little bit because they where just a little off. The sliders went on no problem, but I had to bend the adjustment bar on the passenger side that lets you slide back and forth on the slider up a little to clear the trans tunnel.
With there bracket and rail combo the seats sit a little high, but I think its also from the seats themselves being taller. They hit the roof when I try to get to my back seats using the seat release. So I have to use the seat back adjustment so it won't hit the roof.
I have the Recaro Speeds in black with blue stitching.
http://www.wedgeengineering.net/SEAT...6/Default.aspx
http://www.polepositionusa.com/
Edit: I've also heard of people using the stock rails with some work to make them fit.
With there bracket and rail combo the seats sit a little high, but I think its also from the seats themselves being taller. They hit the roof when I try to get to my back seats using the seat release. So I have to use the seat back adjustment so it won't hit the roof.
I have the Recaro Speeds in black with blue stitching.
http://www.wedgeengineering.net/SEAT...6/Default.aspx
http://www.polepositionusa.com/
Edit: I've also heard of people using the stock rails with some work to make them fit.
Thread
Thread Starter
Forum
Replies
Last Post