Anyone got any idea on turbo car?
Anyone got any idea on turbo car?
Well it all started out with a T2 conver.
Motor, R Tek 1.7, but the motor leaked coolant so I had to go.
I had an NA with low kms good compression.
The picture.
NA motor
Port matched lower manifold, FD upper with FD throttle body, Greddy BOV
R Tek 1.7 720 injectors upper 550 injectors lower
T2 boost senor
T2 TPS
T2 intake temp
T2 cas
T2 O2
T2 AFM
New plugs and wires
New FMIC with new pipe work all tested
THis set up ran on my turbo motor will not run on the NA.
The car will start and run for 30 - 40 second around 2500rpm like a dream them it starts to die and will stall out. The only code I get is for the O2 sensor.
What the hell is going on????
Motor, R Tek 1.7, but the motor leaked coolant so I had to go.
I had an NA with low kms good compression.
The picture.
NA motor
Port matched lower manifold, FD upper with FD throttle body, Greddy BOV
R Tek 1.7 720 injectors upper 550 injectors lower
T2 boost senor
T2 TPS
T2 intake temp
T2 cas
T2 O2
T2 AFM
New plugs and wires
New FMIC with new pipe work all tested
THis set up ran on my turbo motor will not run on the NA.
The car will start and run for 30 - 40 second around 2500rpm like a dream them it starts to die and will stall out. The only code I get is for the O2 sensor.
What the hell is going on????
Thread
Thread Starter
Forum
Replies
Last Post
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM



