inspection comes soon and this is the only thing holding me back...
looking at one in victoria british there only 25 buck but my reverse lights come on once in a while..this leads me to thinking that its a bad connection thats gummed up....now does this switch just screw out??? i see threads on it (looking in the magazine) but i dont want to go ripping on it just yet untill i see what is on the other side of the switch....is the wires connected on the inside of tranny that connects to the switch??? please let me know so i can get this fixxed...

 

common failure, just use a relay instead

 

i read this in the FAQ but wasnt sure where to tap the relay into the wire....close to the tranny???isnt there 2 wires for the back up light switch???
what relay do i need exaxtly??? do i get the relay from radio shack??

 

Look for "Bosch" type relays, they have 5 pins.

 

is that the same thing that icemark sells????
will they hold out to the weather????
i just dont know where to wire it in at....?

 

I wire it in the drivers kick panel, as there is 12 volts ignition and the reverse light wire all there