2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Anyone ever used Illumina's up front and AGX's in the rear?

Thread Tools
 
Search this Thread
 
Old May 6, 2006 | 06:41 PM
  #1  
Healing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2005
Posts: 468
Likes: 0
From: Seattle
Anyone ever used Illumina's up front and AGX's in the rear?



(Graphs taken from Koni's website, http://www.koni-na.com/presentations/civic)

Now, a lot of my reasoning is based off my speculation and reasoning, so feel free to correct my logic etc etc (I hope I'm even reading these shock dynos correctly, myself!). But here goes nothing :

According to the above shock dynos for the Illumina has a far superior rebound damping range compared to the AGX, while the AGX has a broader range between rebound and bump. Translated to real world terms, would this be favorable to spirited driving on streets? It seems like the superior rebound damping range of the Illumina would be able to respond better under hard braking, when weight is suddenly transfered onto the front of the car. The broader range of the AGX's would mean more stroke in the rear as opposed to having Illuminas in the rear, ensuring better contact and jumping from a stiffer setup out back.

Is this reasoning correct? I'd like to hear some opinions. Also, if anyone has any actual experience with this, I'd like to hear that too
Reply
Old May 6, 2006 | 07:43 PM
  #2  
gscully's Avatar
smells like rotary
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 156
Likes: 0
From: Toronto
I wouldn't mismatch dampers. Illuminas are going to ride a little smoother and can handle stronger springs. I had illuminas on a civic before and they worked very well I haven't used kyb AGX but lots of honda guys were having problems with blowing them. What kind of springs are you running?
Reply
Old May 6, 2006 | 11:05 PM
  #3  
Healing's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2005
Posts: 468
Likes: 0
From: Seattle
Right now I'm running stock everything - but lets assume in this scenario the springs used are a constant.

Anyone?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM




All times are GMT -5. The time now is 02:45 AM.