Anyone ever broken a RP FCD?
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Location: Spearfish, SD
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Anyone ever broken a RP FCD?
It worked fine when I bought it, but now it puts out 12v where the signal wire is supposed to be coming from. And theres silicone over the circut board so I cant fix it. Anyone ever had one of these short out on them? What did you do?
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Never broke one. Your saying the brown/red wire has 12v on it??
1. Black/white wire.....power wire, 12v
2. Brown/red wire.......b/t 1-4volts.Signal to the ECU.
3. Pure black(early models brown/black)....ground.
4. Brown/black.....reference voltage of approx 5v
1. Black/white wire.....power wire, 12v
2. Brown/red wire.......b/t 1-4volts.Signal to the ECU.
3. Pure black(early models brown/black)....ground.
4. Brown/black.....reference voltage of approx 5v
#3
Former Moderator. RIP Icemark.
Only time I have seen a broken one was when the ECU was bad and smoked it, or it was the wrong series FCD for the wrong series car (like a s4 FCD used on a S5 car).
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM