chucktownrx7

hello everyone,

i looked through the existing threads and couldnt find a problem similar to mine.
i have a 91 fc vert and recently replaced the passenger window switch because it was broken (the actual plastic switch itself). As i put in the new switch i still cant roll down/up the passenger window but i was able to roll the passenger side window with the master switch on the drivers side but unable to roll it back up i do have power to the switch and the courtesy light. Anyone ever have this problem? any advice is greatly appreciated! thanks for reading

Cameron

barkz

iTrader: (1)

clean the contacts?

jjwalker

bad contacts on the driver side switch. I cleaned the contacts on mine before and they didn't last long (a whole freaking week man!) before it was just done and I had to buy new window switches. I am going to be doing the relay mod either today or tomorrow using two DEI 451m's.

Yes, there will be a thread with pics.

chucktownrx7

I re-soldered them with some new wire and clean the switch as much as possible and it works ! Thanks guys