another where do these hose go question
04-23-06, 04:58 PM
#1
That looks broken
Thread Starter
another where do these hose go question
cant figure out where 2 hoses goe. This is for 88 jspec into 88 N/a. First one comes off the firewall side of the Intake manifold, and the metal points almost straight up, if you're looking at the BAC it's directly to the left of it. Second one comes off of the big circular black thing (?) on driver side part of the fire wall, runs into a metal hard line that travels across the firewall, then ends right next to the top A/C inlet (outlet?). Sorry for the lack of pics, digicam ran out of batteries. TIA
Last edited by twilight slide; 04-23-06 at 05:02 PM.
04-23-06, 05:20 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Big black dude be like a Brake Booster a looking for a vacuum source on the engine.
YOu be talkin 'bout a turbo into a non turbo??? Well the vacuum source on a USA turbo is at the back of the throttle body area so you gotta run a hose from the n/a area to the middle of the engine area.
I'm clueless about the one sitickin straight up into the air. If you meant the one coming off the ACV I'd have a clue.
YOu be talkin 'bout a turbo into a non turbo??? Well the vacuum source on a USA turbo is at the back of the throttle body area so you gotta run a hose from the n/a area to the middle of the engine area.
I'm clueless about the one sitickin straight up into the air. If you meant the one coming off the ACV I'd have a clue.
04-23-06, 05:44 PM
#3
That looks broken
Thread Starter
yeah turbo into nonturbo. the metal one looks like it has a single bolt holding it in, directly to the right of the ACV. i'm thinking this is the vacuum source for the BB.
Thread
Thread Starter
Forum
Replies
Last Post
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM