another damned idle prob!
#1
I AM A THIEF - READ GOOD/BADGUY SECTION!
Thread Starter
Join Date: May 2002
Location: massachusetts
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
another damned idle prob!
ok i searched to see if we figured this one out but seems it hasent. well here goes. when i start my car up when its cold, it will idle at around 600, 500. then i tap the gas and it ill go right to 1500rpm and stay there and slowly go down back to 500. then it ill start goin down to the big line almost stallin and keep doin that, sometimes it stalls. oh yeh when its warm and idlin at 500 i rev it a little and the needle will fly down and stall. after it stalls, and i try to start it up it ill just stall agian, but if i gas it and keep the rpm high for around a minute and slowly let go back to crap 500 idle it will stay there and start jumpin agian. ?!?!? advice please! thanks!
#2
Eat Rice Don't Drive it.
iTrader: (3)
You probably have a vacume leak. Try raising your idle speed for the time being while you find the vac leak. Just adjust the screw on the top of the UIM and rais it to about 7-900rpm or until it doesn't stall. then look for a missing vacume hose.
you did not search very well.
you did not search very well.
#4
Alcohol Fueled!
iTrader: (2)
Originally posted by 1987RX7guy
You probably have a vacume leak. Try raising your idle speed for the time being while you find the vac leak. Just adjust the screw on the top of the UIM and rais it to about 7-900rpm or until it doesn't stall. then look for a missing vacume hose.
you did not search very well.
You probably have a vacume leak. Try raising your idle speed for the time being while you find the vac leak. Just adjust the screw on the top of the UIM and rais it to about 7-900rpm or until it doesn't stall. then look for a missing vacume hose.
you did not search very well.
#5
I AM A THIEF - READ GOOD/BADGUY SECTION!
Thread Starter
Join Date: May 2002
Location: massachusetts
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
lol thanks guys. i suck at lookin for vaccum leaks. do i have the record for slowest rotary. think im gonna go out there until the bac no more goes in. lol.
oh and rx7guy can u elaborate what UIM is. im thinkin i might have a vaccum leak on that hose on the bac valve cuz its all green is that bad? lol i think it is.
oh and rx7guy can u elaborate what UIM is. im thinkin i might have a vaccum leak on that hose on the bac valve cuz its all green is that bad? lol i think it is.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM