another coolant fix success!
#1
Senior Member
Thread Starter
Join Date: Dec 2003
Location: denver CO
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
another coolant fix success!
I used 2 cans of the stuff walmart sells yesterday and left it overnight, no more boiling over or overheating, in fact I took it this morning and had an emissions test done, passed (they do them on a dyno type thing here)
#3
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
I had an internal leak.
I had good luck with the BarsLeak brown powder stuff.
Add half - Idle till hot - cool down (cold) - add other half - idle till hot - cool down.
Drive like crazy for months.
I had good luck with the BarsLeak brown powder stuff.
Add half - Idle till hot - cool down (cold) - add other half - idle till hot - cool down.
Drive like crazy for months.
#5
Not the Bar's
The Bars is for Radiator leaks. Since this is an internal leak, you need the bottle that has copper in it that is for Block Weld. You need 2 of those.
I have done this once last year and the car still runs great. The combustion is starting to leak into the cooling system again. I may have to do it one time this year.
Here is the link to some instructions.
Good Luck and dont give up too quickly.
I have done this once last year and the car still runs great. The combustion is starting to leak into the cooling system again. I may have to do it one time this year.
Here is the link to some instructions.
Good Luck and dont give up too quickly.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM