Alternator harness question
#1
Full Member
Thread Starter
Alternator harness question
Okay so my car was running around 12 volts forever and i thought my alternator was done, the other day I finally pulled it off to go buy a new one, and found out that I have no signal wires for my car(s4 alternator), the harness is completely missing. Anyways I found the two wire plug in harness at a parts store and also tested my alternator while I was there..tested good. Which part of the engine harness do those two wires tie into? If anyone has a picture that'd be great and would make it alot easier for me. I still have to find out where the wires are, it was a tii swap so I'm thinking along the way the original owner forgot them somewhere or lost em...Thanks for any help, greatly appreciated.
(Want this thing running good for spring!)
(Want this thing running good for spring!)
#2
Full Member
Join Date: Dec 2009
Location: Hickory, North Carolina
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Try here
http://www.rx7city.com/Manuals/89-91...Electrical.pdf
and here
http://www.rx7city.com/Manuals/89-91...Electrical.pdf
Between the two you should be able to find it.
http://www.rx7city.com/Manuals/89-91...Electrical.pdf
and here
http://www.rx7city.com/Manuals/89-91...Electrical.pdf
Between the two you should be able to find it.
#3
Full Member
Thread Starter
Does anyone have a picture of the back of their alternator, it'll be much easier if I can find which part of the harness it ties into visually then running through a wiring diagram
#5
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
I read about doing a TII swap with the TII harness on an N/A car..
Look at putting 12 volts to the alternator with a Single wire from the battery(positive wire).
If you would have used the N/A harnes,it has that wire already..BUT the TII harness does not.
...It would be OK if the car itself WAs a TII before..but since it Wasn't..then that may be your Problem..
..see threads by HAILERS.(key word alternator or tII swap).
EDIT: I just punched in : hailers alternator .....with search and I got 9 pages.
Look at putting 12 volts to the alternator with a Single wire from the battery(positive wire).
If you would have used the N/A harnes,it has that wire already..BUT the TII harness does not.
...It would be OK if the car itself WAs a TII before..but since it Wasn't..then that may be your Problem..
..see threads by HAILERS.(key word alternator or tII swap).
EDIT: I just punched in : hailers alternator .....with search and I got 9 pages.
Thread
Thread Starter
Forum
Replies
Last Post