2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Alarm Trouble

Thread Tools
 
Search this Thread
 
Old Jul 3, 2004 | 07:59 PM
  #1  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Antonio, Texas
Alarm Trouble

I'm in need of some help guys. I am looking into buying a 87 gxl but the owner says the factory antitheft has locked the ignition. Here's what i know. He lost the keys (apparently w/ the alarm clicker ) and when he tried to get back into his car (with a spare) the alarm went off and he cant get it to shut off. He has had the battery dissconnected and it has been sitting for about a month. he said when you hook the battery back up the alarm comes back on, and the engine wants to start (cranks over i assume) but it wont. He said it was the factory alarm, do they come with the clicker?? or does that mean its aftermarket??? doesnt the alarm dissable via the starter...meaning it shouldnt crank over??? and if it is cranking then its not only the alarm thats wrong??? Could it be that it flooded and the alarm is going off(if its aftermarket)??? ANY thoughts or ideas would help, ANYTHING at all! Thanks alot everybody.
if you have questions, ask, im always checking the forums, thanks, im stumped.
Reply
Old Jul 3, 2004 | 08:03 PM
  #2  
JKM's Avatar
JKM
Tenured Member 15 Years
 
Joined: Oct 2003
Posts: 1,341
Likes: 6
From: Burlington, NC
Well..if it's a factory alarm, then it should do NOTHING. You turn the key, nothing happens at all, it shouldn't even attempt to start. The problem lies elsewhere...
Reply
Old Jul 3, 2004 | 08:29 PM
  #3  
Damien's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Jun 2002
Posts: 62
Likes: 0
From: Hamilton, Ontario, Canada
disconnect the alarm horn so u can troubleshoot in peace and not **** off the neighbours. I dont think the factory alarm came with a clicker, its usually armed when you lock the door from the inside and hold the handel up as you close it. My factory was running off the same fuse as the lights inside the car, its a 7.5A, pull that fuse, do the unflooding procedure and try and start her up.., if you wanna start torubleshooting, pull off your steering column surround and look under there for an aftermarket alarm module... good luck
Reply
Old Jul 3, 2004 | 11:03 PM
  #4  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Antonio, Texas
Anyone Have info on disarming an aftermarket alarm, because it can't be factory, or the car wouldnt crank.... so the alarm is going off.....and it wont start for some reason, im going to check it out in a couple of days. ANY input helps, thanks!


Oh yeah, could the aftermarket alarm have a fuel cutoff or something? how would i find out if it does.... the seller doesnt know much about the car, and he bought it from a dealer, so they probably didnt either. Thanks again.
Reply
Old Jul 4, 2004 | 10:35 AM
  #5  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
The stock security system was not remote controlled.

It only armed and disarmed by lock and unlocking the doors, and when it is active only disables the starter, not the ignition system.
Reply
Old Jul 4, 2004 | 02:52 PM
  #6  
kel's Avatar
kel
24 yrs driving 2nd Gen RX
Tenured Member: 20 Years
 
Joined: May 2002
Posts: 528
Likes: 0
From: A Mile Closer to God (Denver)
I have a factory alarm system from a '88 which I moved over to my '87TII. It goes off without warning, so I found a good way to disable.

If you remove the glove box, there is a small box on the left side which has a cable plugging into a socket mounted on the heate fan housing.

Unplug this connector, and it completely disables the alarm system.

I have pix if you need..


- k -
Reply
Old Jul 4, 2004 | 04:52 PM
  #7  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by kel
I have a factory alarm system from a '88 which I moved over to my '87TII. It goes off without warning, so I found a good way to disable.

If you remove the glove box, there is a small box on the left side which has a cable plugging into a socket mounted on the heate fan housing.

Unplug this connector, and it completely disables the alarm system.

I have pix if you need..


- k -
Why didn't you just fix the problem, instead of disconnecting things...

I just don't get why people rather disconnect something than actually fix the problem
Reply
Old Jul 4, 2004 | 08:30 PM
  #8  
Rx7MPGUY84's Avatar
Rpm abuser
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 780
Likes: 0
From: New Port Richey, FL
sometimes people would rather do an easy out than the hard right
Reply
Old Jul 4, 2004 | 11:14 PM
  #9  
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 14
Likes: 0
From: San Antonio, Texas
It's not the factory alarm in it, so its an aftermarket alarm that i cant shutoff w/o the clicker.... or how can I ??? Anyone know???? And since its not the alarm cutting the starter, what could be wrong with it???? Tons of things or not so many, and what are the first things i should check on a engine that cranks, but wont start????? How would i find a fuel cutoff switch? where to look i mean??? Any ideas or tips are appreciated, Thanks a lot guys!
Reply
Old Jul 5, 2004 | 09:49 AM
  #10  
inflatablepets's Avatar
Rotary Enthusiast
 
Joined: Mar 2004
Posts: 1,473
Likes: 0
From: St Louis
Remove all of the alarm system? Get another one. Thats my .02
Reply
Old Jul 5, 2004 | 07:13 PM
  #11  
kel's Avatar
kel
24 yrs driving 2nd Gen RX
Tenured Member: 20 Years
 
Joined: May 2002
Posts: 528
Likes: 0
From: A Mile Closer to God (Denver)
I can't figger out how to attach a picture to this message, so I've linked it.

Here's a picture of what to unplug to disable the factory alarm. This stuff is behind the glove box.

http://kkoop.com/RXPix/DisableAlarm.jpg


BTW, I'll be storing all the photos I've taken here, so anyone can look up a shot for reference if need be.

Go to

http://kkoop.com/RXPix (case sensitive)

Pictures will be posted here as I get the files named to something descriptive.

- k -
Reply
Old Jul 5, 2004 | 07:20 PM
  #12  
kel's Avatar
kel
24 yrs driving 2nd Gen RX
Tenured Member: 20 Years
 
Joined: May 2002
Posts: 528
Likes: 0
From: A Mile Closer to God (Denver)
Icemark,

Actually, I do plan to fix it. Just didn't want it screaming at me in the mean time.

- k -
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
Oct 3, 2015 01:08 AM
Rotafuzz
New Member RX-7 Technical
3
Sep 30, 2015 09:55 AM
Red-Dragon_Akuma
New Member RX-7 Technical
11
Sep 28, 2015 06:09 AM
ls1swap
3rd Generation Specific (1993-2002)
15
Sep 8, 2015 05:30 PM




All times are GMT -5. The time now is 12:43 AM.