2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

alarm install

Thread Tools
 
Search this Thread
 
Old Feb 15, 2014 | 03:52 PM
  #1  
fc323's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 324
Likes: 3
From: los angeles
alarm install

I need to know where the door triggers are..
Went looking but just got something vague that said blue white at pin switch...
Have no idea where that could be
Any help is appreciated, thanks guys
Reply
Old Feb 15, 2014 | 09:17 PM
  #2  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Originally Posted by fc323
I need to know where the door triggers are..
Went looking but just got something vague that said blue white at pin switch...
Have no idea where that could be
Any help is appreciated, thanks guys
S4 or S5?

For S5, it is Blue/White for the door triggers. You can get the wire at the CPU in the driver side kick panel. you need to use a meter, but I think there is only one blue white wire there.

You do know what the cpu is right? If not, I'll need to explain further as there is a lot of wires in the kick.
Reply
Old Feb 15, 2014 | 09:50 PM
  #3  
fc323's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2010
Posts: 324
Likes: 3
From: los angeles
Its an s4 and yes i know where and which for the cpu... Would it be the same wire?
Reply
Old Feb 15, 2014 | 10:26 PM
  #4  
jjwalker's Avatar
MECP Certified Installer
Tenured Member 05 Years
 
Joined: Feb 2009
Posts: 3,176
Likes: 3
From: Mesquite, TX-DFW
Originally Posted by fc323
Its an s4 and yes i know where and which for the cpu... Would it be the same wire?
Should be, but like I said, you need a multimeter.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
SakeBomb Garage
Vendor Classifieds
5
Aug 9, 2018 05:54 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 08:00 PM.