Air pump silencer?
#1
Rotary Enthusiast
Thread Starter
Join Date: Jul 2001
Location: Nashville, TN
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Air pump silencer?
I was just told that some of the older Rx7s have an airpump silencer. I did a little bit of searching and I think it is on the second gen. Am I right? If so, whats it really called, and would anyone have a part number by any chance? A pic maybe?
Share your wisdom with me please, I am not familiar with the 2nd Gens at all. Thanks a lot in advance.
Share your wisdom with me please, I am not familiar with the 2nd Gens at all. Thanks a lot in advance.
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Couldn't find it in the manual except a schematic of the SECONDARY AIR INJECTION CONTROL SYSTEM, which shows it and calls it a AIR SILENCER. See this picture http://home.earthlink.net/~burntoast...xports_acv.jpg well that yellow circle in the middle that looks like Africa, down at the tip of Africa you see a one inch in diameter outlet on the acv. There will be a black hose connected to it and the hose will go fwd to a black AIRCHAMBER, and from there another black hose will disappear into the r/h bumper/fwd wheel well. You have to take off a splash guard on the fwd end of the r/h wheel well to access it. Or take the bumper off.
#6
Full Member
Join Date: Dec 2001
Location: Fresno, CA
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
My bestest friend in the whole wide world took his out of his 1990 GXL and it makes a cool *** sound now when he accells... I dont think it really helped much performance wise except he lost a few grams of weight...
#7
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
It would make a even cooler sound if your friend replaced the cats with presilencers, and lost the air pump all together. And it would give a BIG performance gain and almost 100 lbs. of weight reduction.
Trending Topics
#9
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Air pump, ACV, silencer and all attached tubing. I put a rubber beaker stopper in the hole coming out of the air filter that used to lead to the air pump.
Of course I have a GSL-SE, and I've heard that you 2nd gen NA guys need the air pump for your 6PI actuators to work. Is that right?
Of course I have a GSL-SE, and I've heard that you 2nd gen NA guys need the air pump for your 6PI actuators to work. Is that right?
#12
Originally posted by NOTA V6
It would make a even cooler sound if your friend replaced the cats with presilencers, and lost the air pump all together. And it would give a BIG performance gain and almost 100 lbs. of weight reduction.
It would make a even cooler sound if your friend replaced the cats with presilencers, and lost the air pump all together. And it would give a BIG performance gain and almost 100 lbs. of weight reduction.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM